Skip to main content

Southwest Airlines Community

Flash Forward—Part Five: Initial Views Inside Our First 737-800

blusk
Aviator C

The pace of the construction of our first 737-800, N8301J, is progressing at a crisp rate.  Did you know that the assembly line is always moving once the landing gear are installed?  It moves about two inches a minute, but any worker who sees a problem can stop the line until the problem is corrected.  In this installment, we get our first look inside the cabin.  Finishing an airplane interior is a lot like finishing a house:  First you complete all the framing before you complete the interior.  Today’s photos from our Boeing friends look at the “kitchen” of our new “house.”

 

The aft galley is loaded as a unit inside the aircraft, and it is being moved down the floor toward the rear of the cabin.  This shot offers a good view of the floor of the cabin before the carpeting is installed, and we also see the insulation/sound proofing on the walls.  The duct running down the length of the cabin will be hidden by the ceiling. 

 

Workers position the galley unit into its new home aft of the rear doors.  It’s pretty obvious that this portion of the -800 cabin will be a lot different looking than our other aircraft, and I’m getting anxious to see the rest of the interior.

 

I first thought those were our new beverage carts, but they are ingenious galley movers.  Blocks are placed between the galley and the top of the cart, and hydraulics lift the galley unit off of the floor.  It can then be moved around using the wheels of the carts.

 

In our final picture for this chapter, the galley sits in its permanent location.  We get a first glimpse at the various galley storage bins.  It looks like the coffee maker is going to be behind the head of the worker on the left.  Because the galley fills the space behind the doors, the aft lavs and the jumpseats will be located differently on this aircraft.  So, there’s a first look inside the doors of our new airplane, and I will share the updates as we get them. 

4 Comments
Xavier_Ware
Explorer C
This is pretty cool. I'm @ Boeing in Renton, WA right now...I drove up here just to see if I could catch a glimpse of the new -800 on the flight line... Guess this installment means that it is still inside tho. =( Very anxious to see it!
tesg
Explorer C
Is there any chance we might get advance notice on when the first revenue flight for this aircraft will be? I'm sure I'm not alone in thinking I might go out of my way to book a seat on it for the novelty of having been there.
George_IATI
Explorer C
these pictures of the Assembly line are fantastic what a lesson Keep it coming thank you so much George Iati
Xavier_Ware
Explorer C
@ tesg "For anyone out there (and I’m one of you!) who tracks “first flights,” our first 737-800 flight is scheduled to be flight #1717, Chicago Midway to Ft. Lauderdale, leaving Wednesday, April 11 at 7:00 a.m. CST."